Installation Guide – Series Z

Installation SOP for Z Series

  1. Open Air Filter Box and remove air filter
  2. Remove all debris and dust within the air filter box
  3. Clean inner surfaces of the air filter box with alcohol to prepare surface for coating
  4. Apply coating evenly on inner surface of air filter box
  5. Wait 30 minutes for coating to air-dry or 15 minutes if air-dried with blower
  6. Install back air filter and close air filter box


Installation of Z Series on commercial aircraft engine

Proposed Coating Treatment on:

  1. Exposed areas on air inlet
  2. All exposed areas on fan blades